GALVANIZED CONVEYORS
(SINGLE-CHAIN)

Extensions
  • Replace a section... or extend the length of your existing elevator.
  • Extensions attach to boot end of existing elevator — requires removal of boot and idler shaft and their reattachment to bottom end of extension.
  • Extension can be welded or bolted to existing elevator. If you choose to bolt on extension — order optional, angle-iron connecting joint below (one connecting joint is welded on extension — one sent along to be welded or bolted to existing elevator).

Note: When ordering, specify if conveyor chain take-up on existing elevator is on discharge or boot end. Chain, poly wear liner and connecting joint are not included. Order separately if needed. See SPECIFICATION AND ITEM NO. GUIDE below.

Click the image below to enlarge

galvanized conveyor single chain extensions

Click here to download this chart