Vinyl Strip Doors
- Reverse every-other vinyl strip
- Sandwich vinyl strips between two- 1x3, 1x4, or 1x6 mount boards, and bolt, screw or nail mount boards together (3" hole spacing, starting 1" from end)
- Assembled mount is then attached to interior wall, with bottom of mount located 3" above door molding (use 1/2" dia. fasteners spaced every 12", starting 2" from end)
NOTE: Attachment to wall vs. door molding provides better thermal seal at the top of door, and reduces risk of tearing strips off mount, or hitting mount. Allow minimum of 18" between objects going through door and bottom of mount this may require locating bottom of mount further above door molding than the recommended 3".